Need Help Resetting Bluetooth Headphones? Here’s A Guide

It can be frustrating not to be able to listen to music properly due to some connectivity issues with your Bluetooth headphones. Most of the time, the solution to this problem is to do nothing but simply reset your headphones.

The process of resetting your headphones is quite easy in most cases, but with so many brands available in the market, you might get confused about how to do it. That’s why I have curated this article where you can find the brand of your Bluetooth headphones and reset them accordingly. I have tried covering almost all the major headphone brands in this list so that you don’t have to go anywhere else looking out for a solution.

I’m a professional headphone tester with over 5 years of experience reviewing and testing headphones for my readers. So, without wasting any more time, let’s get straight to the topic and discuss how you can easily reset your headphones. I have also mentioned different reasons why your headphones might not be performing like you want them to perform. So, let’s jump right into it and fix all your headphone issues.

How to Reset Bluetooth Headphones

Generally, for resetting headphones, you first need to turn them off and then long press the power buttons till they start blinking blue or red light. However, the resetting process might differ depending on the brand of your headphones.

If you want some detailed guidelines on how to reset your Bluetooth headphones, follow the steps listed below:

1. Power your headphones off.
2. Press and hold the power button for at least 15 seconds.
3. When the headphones start blinking red or blue light, stop pressing the power button to finish the reset process.

Note: Resetting Bluetooth headphones unpairs them from their connected devices. So make sure to pair them again before connecting them with a device.

How to Reset Bluetooth Headphones According to Brand

As mentioned before, the steps for resetting Bluetooth headphones may vary depending on the brand of your headphones. Therefore, we have listed the resetting steps for the following most popular brands of headphones below:

1. AirPods
2. Anker
3. Audio Technica
4. Beats
5. Bose
6. JBL
7. Jabra
8. Jaybird
9. LG
10. Panasonic
11. Philips
12. Samsung
13. Sennheiser
14. Skullcandy
15. Sony

 

1. How to Reset Your AirPods

 

Resetting your AirPods is a simple process that can help resolve connectivity issues or other problems with the device. To reset your AirPods, follow these steps:

1. Place your AirPods in the charging case and close the lid.
2. After at least 30 seconds, open the lid again.
3. Now on your mobile device, go to the Bluetooth settings and press the ‘i’ button on the left side of your AirPods.
4. Select the Forget This Device option and tap OK to confirm.
5. Long press the setup button on the charging for at least 15 seconds. The charging case will initially flash an amber light and then white once your AirPods are reset.

Once the reset process is complete, you can pair your AirPods with your smartphone again, and they should be working properly. If the problem persists, check for a software update, or contact the manufacturer’s support.

2. How to Reset Your Anker Headphones 

The process to reset the Anker Bluetooth headphones depends on their model. However, there is a general procedure to do so. Let’s check it out below.

1. Make sure your headphones are turned off and not connected to any device.
2. Locate the power and volume up (+) buttons on the headphones and press and hold them for 10-15 seconds or until the indicator light starts flashing.
3. Release the buttons and wait for the headphones to turn off completely.
4. Turn on the headphones again by pressing and holding the power button for 2-3 seconds.
5. The headphones should now be in pairing mode, indicated by a flashing LED light.
6. Go to the Bluetooth settings on your smartphone and locate your Anker headphones. Press the ‘i’ button on the left side of your Anker headphones.
7. Select the “Forget This Device” option and tap OK to confirm.

Once the reset process is complete, you should be able to pair your Anker headphones with your mobile device again, and they should be working properly. If you’re still having issues, check the user manual for the specific instructions for your model or contact the manufacturer’s support.

Note: The resetting steps for Anker earbuds are also the same; the only difference is that you will have to place them in the charging case instead of connecting them to a charger. If your model features a multifunction touchpad, you need to long-press the surface for a few seconds to reset the headphones.

3. How to Reset Your Audio Technica Headphones 

 

Audio Technica’s Bluetooth headphones are quite similar to the ones released by Anker, and that’s why you can easily reset them for your use. Here is how you can do it instantly.

1. Plug the headphone’s charger into a power source.
2. Connect the headphones to the charger. Unplug the charging cable and plug it in again. 
3. Open the Bluetooth settings of your mobile device and locate the Audio Technica headphones. 
4. Press the “i” or Settings icon in front of the device name and select Forget This Device or Unpair option to finish the reset process.

After following these steps, you’ll reset your Audio Technica headphones successfully. You can now pair them up with your smartphones again and groove to your favorite tunes with ease.

4. How to Reset Your Beats Bluetooth Headphones 

 

Here’s how you can easily reset your Beats Bluetooth headphones:

1. Disconnect your headphones from charging.
2. Long press the Power button for at least 10 seconds.
3. The LED light of the headphones will start blinking once they have been successfully reset.

Note: The steps for resetting beats headphones may vary depending on the model. For example, you need to long press the mode and volume down buttons to reset Beats Solo Pro headphones. 

5. How to Reset Your Bose Headphones 

Bose is one of the most popular headphone brands in the world, and it offers a wide range of models to choose from. However, the process of resetting them is quite similar to one other. Here is how you can do it.

1. Disconnect all cables of the Bose headphones.
2. Plug in the headphone charger in the socket or the USB port of a computer that is turned on.
3. Now, with one hand, press the Power button, and with the other hand, connect the USB cable to the USB-C port of the right ear cup.
4. Once the headphones start blinking blue light, let go of the power button to end the reset process.

Note: Resetting your Bose headphones won’t unpair them from your device. Hence you can connect them to your device as soon as they reset.

To Top

6. How to Reset Your JBL Headphones

 

JBL has some of the most reliable Bluetooth headphones out on the market, and there is no doubt that it is very trustworthy. Yet, you can’t be 100% sure about tech, so you should know how to reset these headphones when needed. 

1. Press the Power button on the right ear cup to turn off the JBL headphones.
2. Long press the Volume buttons on the right ear cup simultaneously for at least 20 seconds.
3. After that, let go of the buttons. You will get an audio indicating your JBL headphones have been reset.

Don’t forget to check the user manual whenever you are going to reset your JBL Bluetooth headphones, as some of its models come with a completely different setup.

7. How to Reset Your Jabra Bluetooth Headphones

Although Jabra’s Bluetooth headphones are top-tier products, you might still face some connectivity issues in the long run. So, follow these steps when you want to reset your Jabra headphones at your home.

1. Power on your Jabra headphones.
2. Long press the Volume down and Answer/End call buttons simultaneously for 5 seconds.
3. Now, take a look at the Battery and Bluetooth icon on the headphones. They will flash five times once the reset process is complete.
4. After the headphones are reset, turn them off and then again on before pairing them with a device.

Make sure that your Jabra headphones are no more visible on your device. You did not reset them properly if they are still popping under your paired items list. Repeat the steps above. 

8. How to Reset Your Jaybird Bluetooth Headphones 

To reset Jaybird Bluetooth headphones, you can follow these steps:

1. Turn off the headphones and make sure they are not connected to any device.
2. Hold down the power button for 15 seconds.
3. Release the power button and wait for the headphones to turn off.
4. Double-press the power button. 
5. Wait for the headphones to enter pairing mode (indicated by a flashing LED light).
6. Connect the headphones to your device through the Bluetooth settings.

Note: Please note that these steps are based on the Jaybird headphones, so the process may vary depending on the specific model of your headphones. It’s always a good idea to consult the manufacturer’s website or manual for specific instructions on resetting your headphones.

9. How to Reset Your LG Bluetooth Headphones 

 

LG’s line of Bluetooth headphones has always been out of the box. It differs from its competition from its build quality to its pairing process. However, you can easily reset them using a couple of steps that are mentioned below.

1. Long press the Power and Volume down (-) buttons at the same time for 10 seconds.
2. Once the reset is complete, the headphones will turn off automatically.

Note: For resetting LG earbuds, you need to place them inside the charging case. Then long press the touchpad on the left or right earbud for 10 seconds till the status LED flashes a red light indicating that the earbuds are now reset.

10. How to Reset Your Panasonic Headphones 

 

Here is how you can easily reset your Bluetooth headphones from Panasonic.

1. Long press the Touch sensor on the right side for 10 seconds.
2. Once the reset is complete, the status LED will blink blue, and the headphones will turn off automatically.

After you turn them on again, you’ll notice that the headphones are successfully reset and ready to be paired with your smartphone.

To Top

11. How to Reset Your Philips Bluetooth Headphones

Check out the complete procedure for resetting your Philips headphones.

1. Power Off your headphones.
2. Long press the Power button for 10 seconds.
3. To indicate that the reset process is complete, the headphones would power on, enter pairing mode, and then power off again.

 

12. How to Reset Your Samsung Bluetooth Headphones

Although Samsung has some of the most reliable and genuine Bluetooth headphones out in the market, you still might face some issues while using them. Thankfully, there is a very easy process to reset your Samsung bluetooth headphones. Here is how you can do it step-by-step.

1. Insert the earbuds in their charging case, but keep the lid open. 
2. Keep the charging case near its paired device and then connect.
3. Launch the Samsung Galaxy Buds or Samsung Wearable app on the connected device.
4. Scroll down and find About Earbuds.
5.  Tap the Reset option.

Note: When you reset your Samsung headphones, you will lose all your pre-saved commands and EQs from the headphones. This means you’ll now get to use the headphones’ factory/default version. So, always try to note down your manual settings before resetting your headphones.

13. How to Reset Your Sennheiser Bluetooth Headphones

Check out these steps to reset your Sennheiser bluetooth headphones.

1. Place the earbuds in their charging case. 
2. After 10 seconds, take them out and turn them on.
3. Connect the charging case to a power source.
4. Place the earbuds in the case again, and at the same time, long press the Control panel for at least 6 seconds. The earbuds would get reset to factory default.

 

14. How to Reset Your Skullcandy Headphones

 

Some of the most dope headphones come from Skullcandy and resetting them is as easy as it gets. Here is how you can do it within minutes.

1. Open the Bluetooth settings of your PC or mobile phone and remove Skullcandy from the list of paired devices.
2. Simultaneously long press the Volume buttons on the right ear cup.
3. The LED indicator lights will flash yellow once the headphones have been reset.

After resetting your headphones, you can now pair them again with your mobile or PC. Note that you won’t be able to retrieve your past settings and EQ options once you reset your headphones.

15. How to Reset Your Sony Headphones

 

It is very easy to reset your Sony bluetooth headphones, thanks to its super easy user interface. Here are the steps that you can follow to reset your headphones.

1. Power off your Sony headphones.
2. Long press the Power and Play/Pause buttons at the same time for at least 4 seconds.
3. Once the reset is complete, the indicator LED will flash a blue light.

After this, your Sony headphones will be successfully reset to their original settings.

When Should You Reset Your Bluetooth Headphones?

Bluetooth headphones develop bugs and glitches over time which can cause several problems. If you’re having one of the following issues with your headphones, then it’s time to reset them: 

• If your headsets aren’t charging.
• If you cannot find the headphones in the Bluetooth settings of your devices.
• If your device appears in the Bluetooth settings, but you can’t pair your device with it.
• If you’re unable to connect your Bluetooth headphones to your smartphone or laptop.
• When the headphones keep disconnecting, even though they’re fully charged.
• If your headphones are connected, but you can’t hear anything, even when playing audio or video.
• If you experience delayed audio while watching a video.
• If you’re listening to an unusual sound in your headphones, even when nothing is being played. 

Note: Resetting your headphones would only fix those errors that have resulted due to bugs and glitches. Any physical damage with the headphones would not be fixed by resetting.

Why Do Pairing Issues Arise? 

Pairing issues arise when the battery level of the headphones is low, or your device is too far from the headphones. However, these aren’t the only reasons; many other factors also lead to pairing issues in Bluetooth headphones.

For example, if you own headphones that feature an old version of Bluetooth, which the manufacturer no longer supports, it can lead to paring issues. Additionally, if too many wireless devices are placed near your headphones, it can cause primary bandwidth congestion leading to delayed audio and audio stutters.

To Top

Tips to Avoid Bluetooth Connection Issues

If you want to avoid Bluetooth connection issues on your headphones, here are some tips that would help you:

• When using your headphones, ensure they have enough charging and are up-to-date.
• While using a single earbud, don’t place your phone on the left side if you’re using the right earbud and vice versa. This is because the Bluetooth waves can’t travel through your body.
• Avoid pairing your Bluetooth headphones with multiple devices. If you have paired your headphones with more than two devices, unpair them from the devices you rarely use.
•  The distance between the headphones and the connected device should be at most 30 feet.
• If you’re having connection issues with your headphones even though they are charged and within range, restart them and then try to connect.

 

What if the Reset Doesn’t Work?

Tried resetting your Bluetooth headphones but failed? Here are some tips you should follow before resetting your headphones:

• Make sure your device is in Bluetooth mode. 
• Unpair your Bluetooth headphones from all devices.
• Restart your mobile device or PC.
• Check if your device and headphones are charged.
• Make sure your headphones and device are within range.
• Move away from all wireless devices placed near your headphones other than the device you’re connecting with.
• Update your headphones.

Check our guide on Best Around-the-Neck Bluetooth Headphones.

 

Conclusion

Resetting your Bluetooth headphones can eliminate several connectivity and audio issues that occur over time due to bugs and glitches. If you’re also going through connectivity and audio issues with your headphones, it’s time to reset them by applying the steps mentioned in this article, so you can enjoy listening to your favorite music and videos on your headphones. 

If you find this article helpful, do share it with your friends and family who also need a complete guide to reset their bluetooth headphones. Reach out to us if you have any questions or suggestions for us. We love to hear from you.